COPLAND


  • PRODUCTS
  • ABOUT
  • LEGACY
  • DISTRIBUTORS
  • HOME

COPLAND
ARCIVES



SINCE 1984



CTA305

Control amplifier





Production start: 2002


Intended to be at the centre of a high performance audio system, the CTA305 is a flexible control amplifier with five line-level inputs, including a monitor loop, and a built in RIAA circuit accommodating moving magnet and high output moving coil cartridges.


Under its time of production two versions came out.

Like the CVA306 multi channel-amplifier the circuitry was changed for use with a new tube complement.


CTA305 tube complement:

First version: Serial No: 305001 - 305200

PCB Circuit board marked 305CA1

4 pc. ECC83 /12 AX7


Second version: Serial No: 305201 and forward.

PCB Circuit board marked 305CA2

2 pc. ECC83 / 12AX7 (RIAA Section)

2 pc. 6992 (Line Section)


Note! The ECC83 and the 6922 are not interchangeable tubes. Each version of the CTA305 can only run with its dedicated tube type.


System remote-control: Copland RC102



CTA305 Features:



4 Vacuum tube design

Phono RIAA Preamplifier

Inputs : Six

Tape Outputs : One

Record Monitor

Multi regulated power supply

All 1% Precision Film Resistors

All Polypropylene Film Capacitors

Shielded Power Transformer Toroidal-Core

Extra vide dynamic range 20V RMS Out

Ext. 12V remote power on/off trigger

IR Remote Control

Motor Driven Volume Control



CTA305 Specifications:



Vacuum tubes:


First version: Serial No: 305001 - 305200

(PCB Circuit board marked 306CA1 or 306CA2)

4 pc. ECC83 /12 AX7.


Second version: Serial No: 305201 and forward.

(PCB Circuit board marked 306CA3)

2 pc. ECC83 / 12AX7 (RIAA Section)

2 pc. 6992 (Line Section)



Output voltage: Rated 2 V, max. 40 V

Frequecy response Line : +0, -1dB from 10 to 100kHz

T.H.D. Phono – less than 0.1% (output 1 V)

CD, line – less than 0.1% (output 1 V)


Input sensitivity Phono:

3,2 mV (output 1 V)

CD, line : 280 mV (output 1 V)


Input impedance:

Phono – 47 k Ohms

CD, line – 25 k Ohms


Output impedance: less than 200 Ohms

S/N ratio (IHF-A-curve)

Phono: 80 dB

CD, line: More than 95 dB

Power consumption: 40 W

Normal mains voltage: 115 V or 230 V factory set for destination country only.

Mains voltage range: +/- 12%

Dimensions: 430 (W) 86 (H) 390 (D) mm

Weight: 7 kg.


Find the Copland distributor in your country


See them here